Increasing room for patients: Adapting existing hospital spaces for COVID-19 treatment
April 08, 2020
April 08, 2020
Why operating rooms offer distinct opportunities for COVID-19 patients who need isolation
As a result of the COVID-19 virus pandemic, many hospitals are exploring alternatives that increase the number of spaces that can accommodate patients, both those with active COVID-19 virus infection and those requiring observation and testing.
The American Society for Healthcare Engineering (ASHE) has created a resource page covering critical aspects of operations such as air quality and infection prevention to assist healthcare-facilities professionals in their efforts to reduce the spread of COVID-19. ASHE’s resources prompted our team of healthcare designers to think about the spaces hospitals need for COVID-19 treatment.
While we see that various large spaces (arenas, conference centers, etc.) are being used for COVID-19 treatment, there are other opportunities to convert existing spaces at the hospital quickly to accommodate many of these patients. Obviously, a hospital environment provides the best for both patient and to the caregiver.
Healthcare institutions around the world are trying to quickly increase the number of patient rooms that can accommodate COVID-19 patients. As a member of Stantec’s COVID-19 healthcare environment response team and a long-time expert on isolation hospitals, I wanted to share some of the options available to hospitals that have been developed and vetted with regulatory agencies.
For many hospitals, converting operating rooms (ORs) and ambulatory surgical centers is a promising solution that offers immediate increase in the number of rooms for COVID-19 patients. These OR spaces are currently underutilized due to a reduced emphasis on elective surgeries. They are already outfitted with the appropriate air changes and air pressure. OR rooms can be converted to double-patient isolation rooms. In fact, the anaesthesia equipment in these spaces is readily available for ventilator support, with only one additional ventilator needed.
These rooms typically have existing equipment booms that can be used for the installation of plastic shielding between patient beds. This allows the room’s conversion into multiple isolation patient rooms to house those with a similar diagnosis.
However, these existing OR room systems must be negative pressure and HEPA filtered. If the facility does not have a central HEPA filter bank, it may be necessary to install a HEPA filter box at the return air grill so that it filters the exhaust (the aerosols created by aspiration treatment) to the outside of the building. We don’t want to remove virus-contaminated air only to spray it outside or back into the facility. There is a high likelihood that these HEPA filters are already available on the medical campus through contractors or testing and balancing agents.
Broadly speaking, hospitals will need four categories of space in order to comprehensively manage patient needs during this pandemic:
We need to act fast to increase the quantity of COVID-19 spaces for patients on ventilators.
The first category of spaces above, AIIRs with filtering, will be needed to treat the most critically ill. Care facilities need spaces that can accommodate the roughly 20-25% of the COVID-19 patients who will be on ventilators. Because ventilators produce air that’s contaminated by aspirated fluid, they must be kept in isolation with air systems that can dissipate the contaminated air flow quickly. These spaces must release moisture into the air, have HEPA-filtered air, and accommodate high air changes as well as negative pressure.
Unfortunately, most hospitals do not have enough dedicated AIIRs. Usually, hospitals in the US (by code) have about 10% of their patient rooms set up as isolation rooms, roughly less than half of what they’re going to need to accommodate COVID-19 patients. A 1,000-bed hospital at a major medical center might have about 100 AIIR rooms but will likely need a total of 200 to 250, at minimum, to meet the expected demand.
Ideally, these conversions will be approved by relevant agencies such as the local state departments of public health and the Center for Medicare Services (CMS). CMS and state public health agencies will be looking for compliance with the Centers for Disease Control and Prevention (CDC) requirements for the design of AIIR spaces and will be interested in other patient-care rooms having negative pressure.
Generally, the regulatory reviewers have stated that the clinical care mission drives the space requirements. Good news related to these needs is that most local jurisdictions are suspending permitting requirements for temporary healthcare space reconfigurations at this time. Regulatory agencies are letting healthcare institutions define what needs to be built to protect the caregivers and patients within their institutions.
If our group’s intuition is correct, there are a lot of operating room spaces in the US that qualify for these conversions. We need to act fast to increase the quantity of COVID-19 spaces for patients on ventilators, and fortunately that conversion is not labor intensive. It can be done with materials readily available to hospitals and can quickly increase the volume of isolation rooms available for treating COVID-19 patients. We need to quickly and efficiently leverage our existing spaces and infrastructure, allowing our healthcare professionals to focus on providing care in this time of crisis.